Per side versus on diameter
Thickness per side is the chrome layer on one side of the surface; the increase on diameter is twice that. “Chrome 20 μm” on a drawing can be read two ways, so write “hard chrome 20 μm per side”.
Chrome thickness is re-checked with a coating thickness gauge before packing. After the partner plant has plated the bars, they return to Yixin, where chrome thickness, diameter and surface are checked.
Choosing by service conditions
Wear and guidance in dry conditions: a thinner layer within the range is enough. Chrome hardness can reach HV800+, and wear resistance comes mainly from that hardness, not from thickness.
Damp or outdoor service, or a buyer's corrosion requirement: choose a thicker layer. Salt-spray performance is not part of the standard specification. Where a rating is required, we specify a thicker chrome layer and can have the order tested by a third-party laboratory.
Effect on size and lead time
The final diameter tolerance is the size after plating. A thicker layer changes the ground size before plating, so fix the thickness when ordering and do not change it during production.
Lead time for thick chrome is quoted per order. For standard chrome on export orders: cut-to-length from stock 3–5 days, non-standard diameters 7–10 days, custom heat treatment 10–20 days, plus the time to book the vessel.
What to write on the order
Product and condition (soft shaft, induction-hardened shaft or Q&T chrome-plated bar); diameter and tolerance after plating; hard chrome thickness per side; surface roughness (Ra ≤ 0.4 μm on chrome is typical); whether third-party testing is required, and by which method.
Yixin does not supply decorative chrome; requirements outside 10–50 μm per side need a separate assessment.

