RESOURCES

Product range, capability boundaries and RFQ checklist in one place

Use these resources for early selection and internal purchasing communication. Stock, price, lead time, size range and final acceptance values remain order-specific.

PDF · CN / EN

Yixin Precision Machinery (Changzhou) Product Overview, Chinese and English

A 4-page A4 file covering 9 product types, standard specifications and capability, third-party test results, terms and the RFQ checklist.

Download PDF
Updated: 2026-10-08Use: early selection / RFQ preparationLanguages: Chinese + English

SHAFT KNOWLEDGE BASE

Bilingual technical and decision guides with traceable primary sources

Built from official ISO, ASTM and Chinese national-standard pages to clarify terminology, parameters and acceptance boundaries. These guides do not replace the standards, drawings or technical agreement.

Chrome bar, caliper, micrometer and a simple shaft sketch01

PROCUREMENT GUIDE

How to write a shaft RFQ: diameter, material, inspection and packing

A practical RFQ checklist for chrome-plated shafts, ground bars and Q&T shaft materials: dimensions, condition, surface, inspection and delivery scope.

shaft RFQtechnical specificationprocurement checklist
Read technical guide
Outside micrometer on a ground shaft, with a bushing and a bearing02

SIZE & FIT

Shaft tolerance and fit: why “h6” or “high precision” is not enough

A clear explanation of basic size, deviations, tolerance zone and fit, plus the measurement conditions needed for long or precision shafts.

shaft toleranceshaft fitdimensional measurement
Read technical guide
Ground bar on V-blocks with a dial indicator checking straightness and run-out03

SURFACE & GEOMETRY

Ra, straightness and cylindricity are different shaft requirements

Why surface texture, shaft form and run-out must be specified separately, with the measurement information needed for purchasing and acceptance.

surface roughnessshaft straightnesscylindricity
Read technical guide
Coating thickness gauge probe on a hard-chrome bar04

ENGINEERING CHROME

How to specify a chrome-plated shaft: substrate, coating and final size

A purchasing guide to engineering chrome versus decorative chrome, coating thickness, substrate condition, finishing, inspection location and final dimensions.

hard chromechrome-plated shaftcoating thickness
Read technical guide
Etched cross-sections of steel bars showing hardened rim and core05

MATERIAL & HEAT TREATMENT

How to specify 45 steel, 40Cr and Q&T condition for shaft purchasing

Using current Chinese national standards to separate material grade, delivery condition, Q&T requirements and document scope without assuming equivalence.

45 steel40Crquenched and tempered
Read technical guide
Rockwell hardness tester testing a bar sample on a V-anvil06

INSPECTION & REPORTS

How to read HRC and HV reports: scale, force, location and conversion limits

A buyer's guide to Rockwell and Vickers results, explaining why one point, different scales and converted values should not be mixed without context.

hardness testingHRCHV
Read technical guide
Chrome linear shafts with linear bearings07

DECISION GUIDE

Gym equipment guide rods: soft or induction-hardened chrome shaft, bushings or linear bearings

How to choose guide rods for weight stacks and Smith machines: check the mating part first, then decide between a soft and an induction-hardened chrome shaft, tolerance, chrome layer and length.

gym equipment guide rodinduction hardened chrome shaftlinear bearing
Read technical guide
Hydraulic cylinder with a chrome piston rod08

DECISION GUIDE

Piston rod steel: grade 45, 40Cr or 42CrMo — choose by load and shock

How the three Q&T chrome-plated bars differ, their Q&T hardness, published sample results, and when alloy steel is not needed.

piston rod steel42CrMoQ&T chrome-plated bar
Read technical guide
Coating thickness gauge on a hard-chrome bar09

DECISION GUIDE

Hard chrome thickness: how to choose within 10–50 μm per side

How to write chrome thickness on an order, per side versus on diameter, what a thicker layer does to lead time, and how to ask for corrosion performance.

hard chrome thicknesschrome-plated barcoating thickness
Read technical guide
Bars wrapped in bubble film in a wooden case010

BUYING DECISION

Chrome bar: import directly from China, or buy from a local stockist

Decide by quantity, timing and whether you can handle an import, with the costs a buyer has to add on top of an FOB price.

import chrome barminimum orderFOB
Read technical guide
Coating thickness gauge on a hard-chrome bar011

DECISION GUIDE

Chrome-plated shaft or stainless steel shaft: corrosion, wear and machining

Where each type fits. A chrome-plated shaft resists rust only where the chrome is intact, so cut ends and machined areas need their own protection. Yixin does not supply stainless steel shafts.

chrome-plated shaftstainless steel shaftcorrosion and wear
Read technical guide
Bars packed in an export wooden case012

EXPORT COMPLIANCE

China's steel export licence since 2026: what chrome bar buyers need to know

Since 1 January 2026 China requires an export licence for 300 steel customs codes. Which bars are covered, who applies, how many shipments one licence covers, and what it means for your lead time.

China steel export licenceimporting chrome bars from Chinaexport compliance
Read technical guide

GLOSSARY

Four common product terms, clearly defined

Concise definitions used by this site for selection. The confirmed technical agreement remains authoritative.

Chrome-plated soft shaft
A chrome-plated shaft without surface induction hardening, leaving greater flexibility for turning, milling or drilling after supply.
Induction-hardened chrome shaft
A shaft induction hardened before hard chrome plating, selected when surface wear resistance and guidance stability are priorities.
Ground round bar
Round stock finished by grinding to establish dimensions and surface condition, commonly used for further shaft machining.
Q&T chrome-plated bar
A quenched-and-tempered base combined with hard chrome; base condition, chrome and final tolerance are confirmed separately.

RFQ CHECKLIST

Prepare six items for a faster technical review

  1. 01Product type and application
  2. 02Material grade or reference and heat-treatment condition
  3. 03Diameter, length, quantity and tolerance
  4. 04Chrome, hardness, case depth and end machining
  5. 05Inspection method, sampling and acceptance criteria
  6. 06Packing, destination and contact details