← Back to products

42CrMo, quenched and tempered

42CrMo Q&T Chrome-Plated Bar

A 42CrMo alloy-steel quenched-and-tempered base (HRC30–38) with a hard-chrome surface, for chrome shafts under heavy or shock loads.

Inquire about this product
42CrMo Q&T Chrome-Plated Bar
42CrMo, quenched and tempered

SPECIFICATIONS

42CrMo Q&T Chrome-Plated Bar: standard specification

Standard specification. Other sizes, tolerances and chrome layers are quoted against your drawing.

Grade42CrMo to GB/T 3077-2015 · comparable, for reference only: 42CrMo4, SCM440
DiameterØ8–100 mm, made to order (from 1 t, 7–10 days)
ToleranceØ8–11: −0.02/−0.05 mm · from Ø12: 0/−0.02, −0.01/−0.03 or −0.02/−0.05 mm
HardnessQ&T hardness HRC30–38
Hard chrome10–50 μm per side, chosen per order
Surface roughnessRa ≤ 0.4 μm
Straightness≈ 0.1 mm/m from Ø25 · ≈ 0.2 mm/m below Ø25
Length & cuttingFull bars 4 m, 6 m, 7.5 m or 8.1 m; CNC saw cut to length from 200 mm (≈ 3 mm allowance), ends left as sawn
Certificates & testingSteel mill certificate for each heat, forwarded unaltered; foreign grades named here are for reference only; third-party testing commissioned per order on request
TYPICAL APPLICATIONS

Heavy-duty hydraulic and moving components; guidance and transmission parts under shock loads; custom chrome shafts requiring a 42CrMo base.

SELECTION NOTE

If you only need a wear-resistant chrome surface and not the strength and toughness of a Q&T core, a soft or induction-hardened chrome shaft may cost less.

ABOUT THIS BAR

42CrMo Q&T Chrome-Plated Bar: how it is made and when to choose it

A 42CrMo alloy steel bar (42CrMo to GB/T 3077-2015 · comparable, for reference only: 42CrMo4, SCM440), quenched and tempered to HRC30–38 and finished with a hard chrome surface, made to order in Ø8–100 mm. It is for chrome shafts and piston rods under heavy or shock loads, or where the drawing specifies 42CrMo.

Hard chrome plating is done by a long-term partner plant to our specification, and the bars are inspected by Yixin before packing.

If your order requires the chemical limits of 42CrMo4 or SCM440, state this in your enquiry; we check the heat analysis on the mill certificate before confirming.

RELEVANT PROCESS CAPABILITY

Technical baselines relevant to this product route

010.02 mmtolerance band to drawing
0210–50 μmchrome per side, chosen per order
03HV800+chrome hardness capability

Typical process capability. Final values for each size are fixed on the confirmed drawing, specification and order.

PRODUCT FAQ

Questions buyers ask about the 42CrMo Q&T Chrome-Plated Bar

01When should I choose 42CrMo for a piston rod?

Choose 42CrMo for heavy or shock loads, or when the drawing specifies 42CrMo. It is quenched and tempered to HRC30–38 (our 40Cr Q&T is HRC28–35; grade 45 Q&T is surface HRC25–28 or 28–32).

02How does your 42CrMo compare with 42CrMo4 or SCM440?

Our 42CrMo is made to GB/T 3077-2015. 42CrMo4 and SCM440 are comparable grades for reference only; the chemistry ranges differ. If your order requires their chemical limits, tell us in the RFQ and we check the heat analysis on the mill certificate before confirming.

03What sizes, MOQ and lead time?

Ø8–100 mm, made to order from 1 t, in 7–10 days plus sea-freight booking. Full bars of 4 m, 6 m, 7.5 m or 8.1 m, or cut to length from 200 mm.

04Do you also supply 42CrMo without chrome?

Yes. 42CrMo is also made to order as a Q&T ground bar without chrome. Like the chrome-plated bar it comes in the Q&T condition only: Q&T hardness HRC30–38, Ø8–100 mm, from 1 t. Send the specification and we confirm it in the quotation.

SERVICE

Export terms

How standard orders are handled. Volume and special requirements are written into the quotation.

Minimum order
1 t per order (different sizes can be combined); 20–50 kg sample orders (the sample fee is refunded with your order; samples go by international express, freight paid by the buyer)
Lead time
Cut-to-length from stock 3–5 days · non-standard diameters 7–10 days · custom heat treatment 10–20 days · 42CrMo 7–10 days, plus sea-freight booking; thicker chrome layers are quoted per order
Trade & payment
FOB Shanghai or Ningbo · T/T only, 50% deposit, balance before shipment (no L/C)
Packing
Export: bars wrapped in bubble film and packed in wooden cases; domestic: bubble film and cotton-rope ties. No steel straps on finished bars, so the surface is not marked; your brand can be printed on the packing
Documents
Commercial invoice, packing list and steel mill certificate for each heat (forwarded unaltered); certificate of origin arranged per order; third-party inspection on request
Response
Quotation reply within one working day

Inquire about 42CrMo Q&T Chrome-Plated Bar

Send diameter, length, quantity or a drawing. We reply with grade, tolerance, chrome thickness and lead time.

Prepare RFQ