FACTORY & COMPANY

Grinding and induction heat treatment under one roof in Changzhou

Changzhou Yixin Precision Machinery Co., Ltd. runs an approximately 6,000 m² production site in Wujin, Changzhou, making chrome-plated shafts, ground round bars and Q&T bars for cylinder makers, automation and linear-motion OEMs, machine builders and bar distributors.

Workshop interior (from the Intertek 360° capture)The Yixin workshop, Xueyan Town, Wujin, Changzhou
≈ 6,000 m²production site in Wujin, Changzhou
12centerless grinders
4induction lines: 2 Q&T, 2 hardening
Ø4–140 mmstandard range, up to Ø200 mm made to order

THE COMPANY

In the shaft and bar business since 2015

Changzhou Yixin Precision Machinery Co., Ltd. makes chrome-plated shafts, induction-hardened chrome shafts, ground round bars and quenched-and-tempered (Q&T) bars at a production site of about 6,000 m² in Wujin, Changzhou, China. We have been in the shaft and bar business since 2015, first in Kunshan; Changzhou Yixin was registered in 2023. We work in grade 45 steel to GB/T 699-2015, and in the alloy steels 40Cr and 42CrMo to GB/T 3077-2015. Comparable foreign grades, for reference only: C45, S45C, SAE 1045; 41Cr4, SCr440; 42CrMo4, SCM440.

Cold drawing, peeling, roll straightening, induction Q&T, induction hardening, centerless grinding, polishing and CNC cut-to-length are done in our own workshop, on 12 centerless grinders and 4 induction lines. Hard chrome plating and machining (turning, milling, threading) are done by long-term partner plants to our specification, and we check chrome thickness, diameter and surface before packing.

The standard diameter range is Ø4–140 mm, and up to Ø200 mm is made to order. Tolerance bands go down to 0.02 mm, and hard chrome is 10–50 μm per side, chosen per order. Bars are supplied as full lengths of 4 m, 6 m, 7.5 m or 8.1 m, or CNC cut to length from 200 mm.

We supply cylinder makers, automation and linear-motion OEMs, machine builders and bar distributors. Yixin is an Alibaba.com Verified Supplier, assessed on site by Intertek in June 2026. Sample bars were tested by independent laboratories in July 2026; the reports are on our Quality page.

QUICK ANSWERS

What buyers ask us first

01Who is Yixin Precision Machinery?

Changzhou Yixin Precision Machinery Co., Ltd. (brand YXROD) makes chrome-plated shafts, induction-hardened chrome shafts, ground round bars and quenched-and-tempered bars in grades 45, 40Cr and 42CrMo at its own production site of about 6,000 m² in Wujin, Changzhou, Jiangsu, China, and exports them to buyers abroad.

02What is made in-house, and what do partner plants do?

Cold drawing, peeling, roll straightening, induction Q&T, induction hardening, centerless grinding, polishing and CNC cut-to-length are done in our own workshop. Hard chrome plating and machining (turning, milling, threading) are done by long-term partner plants to our specification, and we check chrome thickness, diameter and surface again before packing.

03Which sizes can you supply?

Standard diameters Ø4–140 mm, up to Ø200 mm made to order; hard chrome 10–50 μm per side, chosen per order; full bars of 4 m, 6 m, 7.5 m or 8.1 m, or CNC cut to length from 200 mm.

04What is the minimum order?

1 t per order (different sizes can be combined); 20–50 kg sample orders (the sample fee is refunded with your order; samples go by international express, freight paid by the buyer)

05What are the payment terms and lead times?

FOB Shanghai or Ningbo · T/T only, 50% deposit, balance before shipment (no L/C). Lead time: Cut-to-length from stock 3–5 days · non-standard diameters 7–10 days · custom heat treatment 10–20 days · 42CrMo 7–10 days, plus sea-freight booking; thicker chrome layers are quoted per order.

06How do I get a quotation?

Send the grade, diameter, length, quantity and tolerance, or simply the drawing, by WhatsApp (+86 135 2446 2888), by email (sales@yxrod.com) or through the RFQ form. We reply within one working day. You can write in English, Spanish, Russian or Portuguese.

07Can I visit the factory?

Yes, by appointment: the factory is at No. 103 Huangyanqiao, Xueyan Town, Wujin District, Changzhou, Jiangsu, China, close to Wuxi. A video walk-through of the workshop is also possible.

FACTORY VIDEO

56 seconds in the Yixin workshop

Footage from Intertek's onsite assessment for Alibaba.com Verified Supplier, June 2026.

WORKSHOP PHOTOS

Our own workshop

Photos of the Yixin workshop; faces are blurred.

Centerless grinding line with finished bundles
Centerless grinding line with finished bundles
Workshop entrance with the Changzhou Yixin Precision Machinery nameplate
Workshop entrance and company nameplate
Centerless grinding line
Centerless grinding line
Centerless grinder close-up
Centerless grinder close-up
Induction heat treatment line
Induction heat treatment line
Bar peeling line
Bar peeling line
Horizontal CNC band saw
Horizontal CNC band saw
Finished bars in the storage area
Finished bars in the storage area
Finished bar bundling area
Finished bar bundling area

OFFICE

Where we meet visiting buyers

Visits can be booked in advance; a video tour of the workshop is also possible.

Meeting room
Meeting room
Office
Office

360° VIEW

Look around the workshop

Start the view, then drag to look around. It works on phones too.

360° view captured by Intertek, June 2026

EQUIPMENT ON SITE

Every core step runs on its own machines

Machines are grouped by process step, from drawing, peeling and straightening to induction heat treatment, centerless grinding and polishing.

Drawing, peeling & straightening

  • Combined bar drawing machine1
  • Bar peeling machine1
  • Cross-roll straightening machines2
  • Point straightening presses2

Induction heat treatment

  • Induction Q&T lines2
  • Induction hardening lines2

Centerless grinding & polishing

  • Centerless grinders, type 8010
  • Centerless grinders, type 832
  • Polishing machines6

CNC cutting

  • Horizontal CNC band saws6
  • CNC circular saws2

IN-HOUSE STEPS

From bar stock to finished bundle

  1. Bar peeling line
    01Peeling
  2. Induction heat treatment line
    02Induction heat treatment
  3. Roll straightening (illustration)Illustration
    03Roll straightening
  4. Centerless grinding line
    04Centerless grinding
  5. Horizontal CNC band saw
    05CNC cut to length
  6. Bars wrapped in bubble film in a wooden case
    06Bundling and packing

Hard chrome plating and machining (turning, milling, threading) are done by long-term partner plants to Yixin's specification; when parts return, Yixin checks chrome thickness, diameter and surface before packing.

PROCESS ROUTES

From saw to grinder: how each Yixin bar is made

Only Q&T grades are quenched and tempered, and only the hardened and linear shafts are induction hardened. Every 45 and 40Cr Q&T bar is roll straightened, and chrome bars are polished before and after plating. For made-to-order 42CrMo, the route is confirmed per order.

40Cr Q&T chrome-plated bar
  1. 01Centerless peeling
  2. 02Induction Q&T
  3. 03Roll straightening
  4. 04Centerless grinding
  5. 05Polishing
  6. 06Hard chrome
  7. 07Final polishing
45 steel Q&T chrome-plated bar
  1. 01Cold drawing (≤Ø28) / peeling (Ø30+)
  2. 02Induction Q&T
  3. 03Roll straightening
  4. 04Centerless grinding
  5. 05Polishing
  6. 06Hard chrome
  7. 07Final polishing

Yixin workshopLong-term partner plant, to Yixin's specificationAll products can be CNC-sawn to length

IN-HOUSE & PARTNERS

What we do in-house, and what partner plants do under our inspection

IN-HOUSE

Forming, heat treatment and finishing

  • Cold drawing, peeling and straightening
  • Induction Q&T and induction hardening
  • Centerless grinding and polishing
  • CNC cut-to-length

LONG-TERM PARTNERS

Plating and machining

  • Hard chrome plating
  • Machining (turning, milling, threading)

Partners work to Yixin's specification. When parts return, Yixin checks chrome thickness, diameter and surface before packing. Technical support and after-sales stay with Yixin.

VERIFIED

Onsite-assessed by Intertek. Alibaba.com Verified Supplier.

In June 2026 Intertek carried out an onsite production and trading assessment of Yixin (report 485557866_P+T, valid to June 2027). Sample bars were tested by independent laboratories in July 2026; the results apply to the samples tested.

Alibaba.com Verified Supplier certificate, onsite assessment by IntertekVerified Supplier certificateValid 10 June 2026 to 9 June 2027See quality and testing

COMPANY DETAILS

Changzhou Yixin Precision Machinery Co., Ltd.

Factory visits and video walk-throughs by appointment.

FactoryNo. 103 Huangyanqiao, Xueyan Town, Wujin District, Changzhou, Jiangsu, ChinaRegistered officeNo. 79 Xuema Road, Xueyan Town, Wujin District, Changzhou, Jiangsu, China+86 135 2446 2888sales@yxrod.comWhatsApp +86 135 2446 2888Send an RFQ