Mechanical support and guidance; parts turned or milled after supply; general sliding fits; light-duty rods whose ends need substantial machining.
45 steel
45 Steel Chrome-Plated Soft Shaft
A chrome-plated shaft without surface induction hardening, suited to applications that still require downstream machining and dimensional confirmation.
Inquire about this product




SPECIFICATIONS
45 Steel Chrome-Plated Soft Shaft: standard specification
Standard specification. Other sizes, tolerances and chrome layers are quoted against your drawing.
| Grade | Grade 45 to GB/T 699-2015 · comparable, for reference only: C45, S45C, SAE 1045 |
|---|---|
| Diameter | Standard range Ø4–140 mm, up to Ø200 mm made to order |
| Tolerance | Ø4–11: −0.02/−0.05 mm · from Ø12: 0/−0.02, −0.01/−0.03 or −0.02/−0.05 mm |
| Hardness | Base ≈ HRC17 (not hardened, easy to machine) |
| Hard chrome | 10–50 μm per side, chosen per order |
| Surface roughness | Ra ≤ 0.4 μm |
| Straightness | ≈ 0.1 mm/m from Ø25 · ≈ 0.2 mm/m below Ø25 |
| Length & cutting | Full bars 4 m, 6 m, 7.5 m or 8.1 m; CNC saw cut to length from 200 mm (≈ 3 mm allowance), ends left as sawn |
| Certificates & testing | Steel mill certificate for each heat, forwarded unaltered; foreign grades named here are for reference only; third-party testing commissioned per order on request |
Do not select a soft shaft by name alone when the application requires high surface wear resistance or an induction-hardened case.
ABOUT THIS BAR
45 Steel Chrome-Plated Soft Shaft: how it is made and when to choose it
A grade 45 steel shaft, centerless ground, polished and hard chrome plated, without induction hardening. The base stays at about HRC17, so the shaft can still be turned, milled or drilled after supply.
Cold drawing (to Ø28) or peeling (from Ø30), roll straightening, centerless grinding and polishing are done in the Yixin workshop. Hard chrome plating is done by a long-term partner plant to our specification, followed by final polishing; we check chrome thickness, diameter and surface before packing.
Typical uses: mechanical support and guidance, general sliding fits, and light-duty rods whose ends need substantial machining. It is not for rods that need an induction-hardened case; for a harder wear surface, choose our induction-hardened chrome shaft.
PROCESS ROUTE
How this bar is made
Dashed steps are done by long-term partner plants to Yixin's specification; all others run in the Yixin workshop.
- 01Cold drawing (≤Ø28) / peeling (Ø30+)
- 02Roll straightening
- 03Centerless grinding
- 04Polishing
- 05Hard chrome
- 06Final polishing
Yixin workshopLong-term partner plant, to Yixin's specificationAll products can be CNC-sawn to length
RELEVANT PROCESS CAPABILITY
Technical baselines relevant to this product route
Typical process capability. Final values for each size are fixed on the confirmed drawing, specification and order.
TECHNICAL GUIDES
Technical topics to review before ordering
PRODUCT FAQ
Questions buyers ask about the 45 Steel Chrome-Plated Soft Shaft
01What is the difference between your soft shaft and the induction-hardened chrome shaft?
The soft shaft is not induction hardened: the base stays at about HRC17 and is easy to machine. The induction-hardened shaft has a case of at least HRC55, about 2 mm deep, under the chrome, for wear and guidance. Both carry 10–50 μm of hard chrome per side, chosen per order.
02Can the soft shaft be machined after supply?
Yes. The base is not hardened, so it can be turned, milled or drilled. Plan the machining so the chrome on the working surface is kept. If you need us to arrange end machining, send the drawing; it is done by a long-term partner plant to our specification and assessed from the drawing.
03Can I use the soft shaft with linear bearings?
For linear bearings we recommend our chrome-plated linear shaft, which is induction hardened (case ≥ HRC55) and usually supplied at 0/−0.02 mm. The soft shaft suits support, guidance and general sliding fits.
04What lengths can you supply?
Full bars of 4 m, 6 m, 7.5 m or 8.1 m, or CNC saw cut to length from 200 mm with about 3 mm allowance. Ends are left as sawn.
SERVICE
Export terms
How standard orders are handled. Volume and special requirements are written into the quotation.
- Minimum order
- 1 t per order (different sizes can be combined); 20–50 kg sample orders (the sample fee is refunded with your order; samples go by international express, freight paid by the buyer)
- Lead time
- Cut-to-length from stock 3–5 days · non-standard diameters 7–10 days · custom heat treatment 10–20 days · 42CrMo 7–10 days, plus sea-freight booking; thicker chrome layers are quoted per order
- Trade & payment
- FOB Shanghai or Ningbo · T/T only, 50% deposit, balance before shipment (no L/C)
- Packing
- Export: bars wrapped in bubble film and packed in wooden cases; domestic: bubble film and cotton-rope ties. No steel straps on finished bars, so the surface is not marked; your brand can be printed on the packing
- Documents
- Commercial invoice, packing list and steel mill certificate for each heat (forwarded unaltered); certificate of origin arranged per order; third-party inspection on request
- Response
- Quotation reply within one working day
Inquire about 45 Steel Chrome-Plated Soft Shaft
Send diameter, length, quantity or a drawing. We reply with grade, tolerance, chrome thickness and lead time.
Prepare RFQ