← Back to products

40Cr, quenched and tempered

40Cr Q&T Chrome-Plated Bar

A 40Cr quenched-and-tempered base combined with a hard-chrome surface for shaft applications requiring both core properties and wear resistance.

Inquire about this product
40Cr Q&T Chrome-Plated Bar
40Cr, quenched and tempered

SPECIFICATIONS

40Cr Q&T Chrome-Plated Bar: standard specification

Standard specification. Other sizes, tolerances and chrome layers are quoted against your drawing.

Grade40Cr to GB/T 3077-2015 · comparable, for reference only: 41Cr4, SCr440
DiameterØ8–140 mm, made to order
ToleranceØ8–11: −0.02/−0.05 mm · from Ø12: 0/−0.02, −0.01/−0.03 or −0.02/−0.05 mm
HardnessQ&T hardness HRC28–35
Hard chrome10–50 μm per side, chosen per order
Surface roughnessRa ≤ 0.4 μm
Straightness≈ 0.1 mm/m from Ø25 · ≈ 0.2 mm/m below Ø25
Length & cuttingFull bars 4 m, 6 m, 7.5 m or 8.1 m; CNC saw cut to length from 200 mm (≈ 3 mm allowance), ends left as sawn
Certificates & testingSteel mill certificate for each heat, forwarded unaltered; foreign grades named here are for reference only; third-party testing commissioned per order on request
TYPICAL APPLICATIONS

Piston rods where the drawing specifies 40Cr or the load needs a stronger Q&T base than grade 45; transmission and guidance parts; loaded moving components; custom chrome-plated shafts.

SELECTION NOTE

If you only need a wear-resistant chrome surface and not the strength and toughness of a Q&T core, a soft or induction-hardened chrome shaft may cost less.

ABOUT THIS BAR

40Cr Q&T Chrome-Plated Bar: how it is made and when to choose it

A 40Cr alloy steel bar (40Cr to GB/T 3077-2015 · comparable, for reference only: 41Cr4, SCr440) induction quenched and tempered to HRC28–35, with a hard chrome surface, made to order in Ø8–140 mm.

Centerless peeling, induction Q&T, roll straightening, centerless grinding and polishing are done in the Yixin workshop. Hard chrome plating is done by a long-term partner plant to our specification, followed by final polishing and inspection by Yixin.

Choose it when the drawing specifies 40Cr, or when the rod load calls for a stronger Q&T base than grade 45. Test reports on our 40Cr Q&T ground bar (composition, hardness, tensile test, dimensions and roughness) are on our Quality page.

Lead time for custom heat treatment is 10–20 days, plus sea-freight booking. Length and cutting: Full bars 4 m, 6 m, 7.5 m or 8.1 m; CNC saw cut to length from 200 mm (≈ 3 mm allowance), ends left as sawn. Certificates: Steel mill certificate for each heat, forwarded unaltered; third-party testing commissioned per order on request. Salt-spray performance is not part of the standard specification. Where a rating is required, we specify a thicker chrome layer and can have the order tested by a third-party laboratory. Typical process capability. Final values for each size are fixed on the confirmed drawing, specification and order. Send diameter, length, quantity and your drawing or RFQ. We reply within one working day with grade, tolerance, chrome thickness and lead time.

PROCESS ROUTE

How this bar is made

Dashed steps are done by long-term partner plants to Yixin's specification; all others run in the Yixin workshop.

40Cr Q&T chrome-plated bar
  1. 01Centerless peeling
  2. 02Induction Q&T
  3. 03Roll straightening
  4. 04Centerless grinding
  5. 05Polishing
  6. 06Hard chrome
  7. 07Final polishing

Yixin workshopLong-term partner plant, to Yixin's specificationAll products can be CNC-sawn to length

RELEVANT PROCESS CAPABILITY

Technical baselines relevant to this product route

010.02 mmtolerance band to drawing
0210–50 μmchrome per side, chosen per order
03HV800+chrome hardness capability

Typical process capability. Final values for each size are fixed on the confirmed drawing, specification and order.

PRODUCT FAQ

Questions buyers ask about the 40Cr Q&T Chrome-Plated Bar

01Why choose 40Cr instead of grade 45 for piston rods?

40Cr is an alloy steel. After quenching and tempering (HRC28–35) it gives a stronger base than grade 45 for loaded rods. Choose it when your drawing specifies 40Cr or the load calls for it; for heavy or shock loads, see our 42CrMo Q&T chrome bar.

02Is this bar in stock?

The 40Cr Q&T chrome-plated bar is made to order in Ø8–140 mm. Lead time for custom heat treatment is 10–20 days, plus sea-freight booking; the exact date is confirmed in the quotation.

03How does your 40Cr compare with 41Cr4 or SCr440?

Our 40Cr is made to GB/T 3077-2015. 41Cr4 and SCr440 are comparable grades for reference only; the chemistry ranges differ. The steel mill certificate for each heat is forwarded unaltered.

04Can you plate thicker chrome?

Hard chrome is 10–50 μm per side, chosen per order. State the thickness in your RFQ; lead time for thicker layers is quoted per order.

SERVICE

Export terms

How standard orders are handled. Volume and special requirements are written into the quotation.

Minimum order
1 t per order (different sizes can be combined); 20–50 kg sample orders (the sample fee is refunded with your order; samples go by international express, freight paid by the buyer)
Lead time
Cut-to-length from stock 3–5 days · non-standard diameters 7–10 days · custom heat treatment 10–20 days · 42CrMo 7–10 days, plus sea-freight booking; thicker chrome layers are quoted per order
Trade & payment
FOB Shanghai or Ningbo · T/T only, 50% deposit, balance before shipment (no L/C)
Packing
Export: bars wrapped in bubble film and packed in wooden cases; domestic: bubble film and cotton-rope ties. No steel straps on finished bars, so the surface is not marked; your brand can be printed on the packing
Documents
Commercial invoice, packing list and steel mill certificate for each heat (forwarded unaltered); certificate of origin arranged per order; third-party inspection on request
Response
Quotation reply within one working day

Inquire about 40Cr Q&T Chrome-Plated Bar

Send diameter, length, quantity or a drawing. We reply with grade, tolerance, chrome thickness and lead time.

Prepare RFQ