← Back to products

45 steel

45 Steel Chrome-Plated Linear Shaft

Chrome-plated shafting for linear motion and guidance, with bearing fit, straightness and end details confirmed against the drawing.

Inquire about this product
45 Steel Chrome-Plated Linear Shaft
45 steel

SPECIFICATIONS

45 Steel Chrome-Plated Linear Shaft: standard specification

Standard specification. Other sizes, tolerances and chrome layers are quoted against your drawing.

GradeGrade 45 to GB/T 699-2015 · comparable, for reference only: C45, S45C, SAE 1045
DiameterØ4–130 mm
ToleranceØ4–11: −0.02/−0.05 mm · from Ø12: 0/−0.02 mm typical for linear bearings; other bands reviewed against your drawing
HardnessInduction-hardened case ≥ HRC55, ≈ 2 mm deep
Hard chrome10–50 μm per side, chosen per order
Surface roughnessRa ≤ 0.4 μm
Straightness≈ 0.1 mm/m from Ø25 · ≈ 0.2 mm/m below Ø25
Length & cuttingFull bars 4 m, 6 m, 7.5 m or 8.1 m; CNC saw cut to length from 200 mm (≈ 3 mm allowance), ends left as sawn
Certificates & testingSteel mill certificate for each heat, forwarded unaltered; foreign grades named here are for reference only; third-party testing commissioned per order on request
TYPICAL APPLICATIONS

Linear-motion systems; guidance and sliding fits; automation-equipment shafting.

SELECTION NOTE

Do not select by diameter alone when bearing fit, straightness, end geometry or working-surface requirements are not yet defined.

ABOUT THIS BAR

45 Steel Chrome-Plated Linear Shaft: how it is made and when to choose it

A grade 45 steel linear shaft, induction hardened to a case of at least HRC55 and about 2 mm deep, then hard chrome plated and final polished. It follows the same route as our induction-hardened chrome shaft, finished and cut for linear bearings.

Forming, straightening, grinding and induction hardening are done in the Yixin workshop; hard chrome plating is done by a long-term partner plant to our specification and re-checked by Yixin.

Tell us the bearing type, straightness and end details so we can confirm the fit. End machining is done by a long-term partner plant to our specification and assessed from your drawing.

PROCESS ROUTE

How this bar is made

Dashed steps are done by long-term partner plants to Yixin's specification; all others run in the Yixin workshop.

Yixin workshopLong-term partner plant, to Yixin's specificationAll products can be CNC-sawn to length

RELEVANT PROCESS CAPABILITY

Technical baselines relevant to this product route

010.02 mmtolerance band to drawing
0210–50 μmchrome per side, chosen per order
03HV800+chrome hardness capability
04≈ 2 mminduction-hardened case

Typical process capability. Final values for each size are fixed on the confirmed drawing, specification and order.

PRODUCT FAQ

Questions buyers ask about the 45 Steel Chrome-Plated Linear Shaft

01What tolerance do you supply for linear bearings?

0/−0.02 mm is typical for linear bearings. Other bands are reviewed against your drawing; tell us the bearing type so we can confirm the fit.

02Is the linear shaft hardened?

Yes. It is induction hardened to a case of at least HRC55, about 2 mm deep, before hard chrome plating — the same route as our induction-hardened chrome shaft.

03Can you machine the shaft ends (holes, threads, steps)?

End machining is done by a long-term partner plant to our specification. Send the drawing and we assess it. Standard supply is cut to length with sawn ends.

04What lengths are available?

Full bars of 4 m, 6 m, 7.5 m or 8.1 m, or CNC saw cut to length from 200 mm with about 3 mm allowance.

SERVICE

Export terms

How standard orders are handled. Volume and special requirements are written into the quotation.

Minimum order
1 t per order (different sizes can be combined); 20–50 kg sample orders (the sample fee is refunded with your order; samples go by international express, freight paid by the buyer)
Lead time
Cut-to-length from stock 3–5 days · non-standard diameters 7–10 days · custom heat treatment 10–20 days · 42CrMo 7–10 days, plus sea-freight booking; thicker chrome layers are quoted per order
Trade & payment
FOB Shanghai or Ningbo · T/T only, 50% deposit, balance before shipment (no L/C)
Packing
Export: bars wrapped in bubble film and packed in wooden cases; domestic: bubble film and cotton-rope ties. No steel straps on finished bars, so the surface is not marked; your brand can be printed on the packing
Documents
Commercial invoice, packing list and steel mill certificate for each heat (forwarded unaltered); certificate of origin arranged per order; third-party inspection on request
Response
Quotation reply within one working day

Inquire about 45 Steel Chrome-Plated Linear Shaft

Send diameter, length, quantity or a drawing. We reply with grade, tolerance, chrome thickness and lead time.

Prepare RFQ